Products
DMR
PTToC
Analog Two-way Radios
Convergence Communication
Industries
Emergency Response
Public Safety
Oil & Gas
Operator
Commercial
Utilities
Security
Mining
Airport
Logistics
Support
System Design and Delivery Support
Devices Service Policy
FAQ
Download Center
Partner
Become a Kirisun Partner
Partner Portal
Talent Plan
Talent Culture
Online Recruitment
About Kirisun
About Us
Press Center
Contact Us
search
privacy
Language
简体中文 English
Professional Radios
DP980/DP990
DP405/DP515
DP810
V9/DP480/DP610
DP415/V8/DP485R
DR600/DR650
TM840/DM850/DM880/DM588
PoC Radios
T60/T65/T350/T450/GP700
TD80
DM880-GW/DM850-GW
TA50
T330/N100/T3
T650
M80/M50
PoC Platform
Can't find the answer?
Please send your question to us.
Email us
Professional Radios
Professional Radios
PoC Radios
PoC Platform
DP980/DP990 DP405/DP515 DP810 V9/DP480/DP610 DP415/V8/DP485R DR600/DR650 TM840/DM850/DM880/DM588
Q
When I read/write frequency, the computer prompts "Initialization serial port error, communication failure".
A
The reasons might be:
1. The PC software model and version are incorrect;
2. The radio is not powered on;
3. The program cable is not original from the manufacturers;
4. The USB interface driver is not installed;
5. The wrong port is chosen;
If not the reasons above, please contact the manufacturer and distributor.
Q
Low audio, intermittent or silent call when in reception.
A
1. Check whether the battery is too low; recharge or replace the battery.
2. Check whether the volume itself is low, increase the volume through the knob or contact the dealer and manufacturer to adjust the microphone gain function.
3. Check whether the antenna is loose or not properly installed. Reinstall the antenna after power-off.
4. Check whether the speaker is damaged or blocked; do some external cleaning.
5. Check whether the radio is beyond BS coverage.
Q
Other voice or noise is heard in the channel.
A
1. Check whether it is interfered by the same frequency users. It is suggested to change the frequency or adjust the noise level.
2. You can configure signaling for all terminals in the group to prevent co-frequency interference. The signaling settings of all terminals must be changed at the same time.
Q
The light is red but no sound is heard.
A
1. No output from the power amplifier tube; replace with a new tube.
2. The microphone may be damaged and needs to be replaced.
Q
A prompt indicating that the repeater is not on.
A
1. Check whether the frequency is set incorrectly and whether the color code and signaling are correct.
2. Check whether the repeater is powered on.
Q
Location cannot be reported.
A
1. In the PC software, turn on GPS/BD, and set the time for report interval.
2. Select Auto Report.
Q
Unable to transmit a call.
A
1. Check whether the call indicator is green. At this time, the radio may be in the receiving status. Press the PTT button when the indicator is idle.
2. Channel parameters can be set in PC software as Transmission Always Allowed.
3. Press the PTT transmission button to check whether the radio indicator is red. If not, check whether the battery is low.
4. Check whether the PTT button is damaged.
345...6
Can't find the answer?
Please send your question to us.
Email us
Describe Your Trouble
We will answer your questions as soon as possible
End User
Dealer
* Provide relevant picture materials to help us solve your question better.
* Provide relevant picture materials to help us solve your question better.
kefu
subscribe
linkein facebook youtube
Register
Sign in
Forgot your password? 
Please click here
Register
I have read and agree to Kirisun service Privary policy and Cookie policy
Forgot your password? 
Please click here
Forget password
Go to  Sign in